whefans.blogg.se

Mac pro 2009 video card
Mac pro 2009 video card








mac pro 2009 video card
  1. #Mac pro 2009 video card install#
  2. #Mac pro 2009 video card drivers#
  3. #Mac pro 2009 video card driver#
  4. #Mac pro 2009 video card full#
  5. #Mac pro 2009 video card series#

Any OS before the last version of Lion will not cut it with any GTX6xx series card.

#Mac pro 2009 video card drivers#

With Mountain Lion 10.8.4 (and 10.8.3) Apple started including nVidia drivers for this card as part of the OS. My displays are connected with two DVI cables and one DisplayPort->DVI cable. The GTX660 provides four display sockets – DVI-dual link (for 27″ and 30″ displays as well as all smaller ones), DVI single link (all others except 27/30″), DisplayPort (not Mini DisplayPort) and HDMI. I use three Dell displays all with DVI sockets. Replace the cover, plug in all your cables and you are ready to go. Power cable plugged into the graphics card. Some later cards require that two power cables are used the GTX660 needs one. The chassis has been flipped through 180 degrees here with the GTX660 sockets on the left, for clarity of illustration.

mac pro 2009 video card

Insert the other (large) end of the PCIe power cable into the graphics card. Then remember to slide the PCIe fan casing back to its original position, thus locking down the rear of the graphics card. Insert the PCIe card retainer and tighten the thumbscrews.

mac pro 2009 video card

Using dual-link DVI cables for maximum definition with displays which have Orange = DVI-I White=DVI-D.Ģ7″ and 30″ displays must be connected to the white or orange DVI sockets Arrow denotes the retainer bar operated by the outer fan casing. The fan casing/retaining bar have been moved to the left.

#Mac pro 2009 video card full#

This moves the PCIe card chromium retaining bar to the left and allows insertion of a full length card: With the button depressed the outer casing of the fan assembly can now be slid to the left. The GTX660 is a double width card, so that second blanking plate must be removed.ĭepress the slider button atop the central fan enclosure – this is generally referred to as the PCIe fan: Undo the two thumb screws atop the PCIe brackets on your right and remove the existing GT120 card. With the chassis oriented so that the PCIe slots go left-to-right in front of you, with their brackets on the right, these two sockets are found immediately to the left of the rear of the PCIe slot nearest to you and just to the right of the large, grey central fan, abutting the base of the processor cage: There are two backplane (motherboard) sockets in the Mac Pro. Disregard the ‘G5’ designation – this is the correct cable. You can pay MacSales three times as much for the same cable if you like. My goal was to transplant the Zotac nVidia GTX660 card from my Hackintosh to the Mac Pro and in practice the process proved to be easy.įirst, however, as the GTX660 requires a separate power supply cable, I bought one of these from Amazon. The GT120 is a slow performer and supports only two external displays, one using DVI the other Mini DisplayPort. The stock card which comes with the 2009 Mac Pro is dated by modern standards. Currently waiting on mine to be shipped before closing this question.For an index of all my Mac Pro articles, click here. So if you have similar plans, be sure to get the mini 6-pin to standard 6-pin connectors they can be hard to find, so it would pay to locate a pair in advance or order ahead of time. The 2009 mac pro (and some other models) require 2x mini 6-pin power connections, and a 6-pin to 8-pn converter. So when I do max out the card, I doubt it will be for extended periods.įurther research! It looks like Early 2009 power supplies are 980 watts ( ) So now it's all a question if using this card will burn out the board in any way. Amnesia) - I'm just looking for a long-term investment and the ability to play at 2560x1600.

#Mac pro 2009 video card install#

So I need to ask Will I risk burning out my machine if I use this card? Are there any steps or notes for running this card safely? Or will it run just fine if I install it correctly with the adapter?Īs a note the majority of work I'll be doing will be video encoding and digital graphics I do game, but I don't play particularly graphics-intense games (E.g. I don't want to buy a lower card on account of my machines specs, as I'd like this card for whatever future computer I may build. The Nvidia website says I should have a power supply capable of 600 watts, and that the card would draw 250 watts (some forums say the card regularly exceeds even that). I'm upgrading my Mac Pro 2009 ( ) with an Nvidia GTX 780 ( ) I've heard that there may be power consumption/burnout issues ( ).

#Mac pro 2009 video card driver#

For the record driver compatibility is not an issue, as I don't use OSX any more (Kubuntu Linux).










Mac pro 2009 video card